Rotary Drum Granulator For Compound Fertilizer Granules Making Machine
Working principle of drum granulator
The series of works drum granulator are: the main motor driven belt and pulley, the drive shaft through the speed reducer, and by working with the shaft opening and the large gear teeth fixed to the body mounted on the gear. Material from the feed end by feed barrel. By the action of an internal structure of the barrel, granulated, and finally out through the outlet. With the continuous rotation of materials continue to enter granulator to achieve mass production.
This machine is developed according to the construction company personnel experience a new generation of drum granulator. The machine has a beautiful appearance, simple operation, low energy consumption, long service life, uniform drying, easy to maintain, is the most advanced domestic granulation equipment. The product is suitable for cold, hot particles and high, medium and low concentrations of fertilizer production scale.
Introduction of drum granulator
This machine is the staff I have many years experience in the production of fertilizer developed a new generation drum granulator. The machine has a beautiful appearance, simple operation, low power consumption, long life, uniform drying, and convenient maintenance. It is more advanced granulation equipment. Suitable for hot and cold granulation, high, medium and low concentrations of fertilizer of large-scale production. In addition, the product is now widely distributed around the world.
Equipment Maintenance
1, bearing bear the full load of the machine, so good lubrication of the bearing life of a great relationship. It directly affects the life of the machine and the operation rate, therefore, required oil must be clean, seal must be good. The main area oiling rotary bearings, roller bearings, all the gears, the movable bearing, sliding surfaces.
2, the newly installed tire easy loosened must always check.
3, pay attention to various parts of the machine is working properly.
4, pay attention to the degree of wear of wearing parts, and always pay attention to replacement of worn parts.
5, the bottom surface of the active device put away, and then remove the dust prevents the machine events encountered unbreakable material bearing on the chassis moves, causing serious accidents.
6. The bearing oil temperature rise should stop immediately check the reason to eliminate.
7, rotation of the gear in operation, if a crash, should be stopped and then immediately checked.
Parameter of drum granulator
| Model | ZG1.6*6 | ZG1.8*7 |
| Inner dia | 1.6m | 1.8m |
| Length | 6m | 7m |
| Speed | 11.5r/min | 11.5r/min |
| Power | 11kw | 15kw |
| Capacity | 5-8t/h | 8-10t/h |
Picture of drum granulator
Product Tags:
|
|
Carbon Steel Compound Fertilizer Rotary Drum Granulator 8T/H Images
|
