Introduction of Fertilizer Granulator Machine
✅ 93%+granulation rate: Unique circular arc disc design, uniform particles, less material return, and a 30% increase in production efficiency!
✅ Thick carbon steel body: corrosion-resistant, wear-resistant, with a lifespan of over 8 years!
✅ 380V industrial power supply: compatible with mainstream global voltages, supporting continuous 24-hour full load operation.
✅ Intelligent control system: The three parameters of tilt angle, speed, and water spray volume can be adjusted to meet different material requirements.
Specification of Fertilizer Granulator Machine
| Model | Inner diam | Side height | Volum | Motor power | Capacity |
| (mm) | (mm) | (m³) | (kw) | (t/h) |
| ZL10 | 1000 | 250 | 0.4 | 2.2 | 0.3-0.5 |
| ZL15 | 1500 | 300 | 1.1 | 5.5 | 0.5-0.8 |
| ZL18 | 1800 | 300 | 1.4 | 5.5 | 0.6-1.0 |
| ZL20 | 2000 | 350 | 1.8 | 7.5 | 0.8-1.2 |
| ZL25 | 2500 | 350 | 2.5 | 7.5 | 1.0-1.5 |
| ZL28 | 2800 | 400 | 3.3 | 11 | 1.0-2.5 |
| ZL30 | 3000 | 450 | 3.9 | 11 | 2.0-3.0 |
Feature of Fertilizer Granulator Machine
1.The granulating rate can be reached more than 93%.
2.The design of granulator which greatly reduce the labor intensity and improves labor efficiency.
3.The disc is sturdy,durable,anti-corrosion,has long life and requires very less maintenance.
4.Easy operation and maintenance.
5.Long service life.
6.Quick profit,good economic returns
The structure of Fertilizer Granulator Machine
The following components are standard disc pelletizer mechanisms:
Base- The base is fabricated using structural members and heavy welded plates. It provides a solid foundational structure pelletizers.
Disc- The disc, also referred to as the pan, is constructed of heavy-duty carbon steel plates. The plates are welded and reinforced to strengthen the overall structure. Included in the disc system is a hand-wheel operated jacking screw. This device easily adjusts the disc’s horizontal angle .
Drive Unit- The drive unit is comprised of automated mechanisms such as the motor, parallel or concentric shaft reducer, and V-belt drive. Both the motor and the reducer are mounted on a bracket behind the disc. The disc is then mounted to the reducer’s output shaft.
Plow / Scraper- Plows and scrapers are independently mounted vane-type components that control the material layer as it tumbles over the surface of the disc. The scrapers of larger diameter discs are covered with a ceramic, wear resistant coating/facing that protects the scraper from abrasive materials.
Plow Support- The plow support is constructed of heavy, welded, structural members. It is fabricated to provide rigidity to the disc support system and permit quick adjustments to the disc angle without requiring a separate plow adjustment.
Product Tags:
|
|
SOP Carbon Steel Fertilizer Granule Machine / 380V Pan Granulation Process Images
|
